Recovery of monomers and fillers from high-temperature-vulcanized silicone rubbers—combined effects of solvent, base and fillers

The depolymerization of high-temperature-vulcanized (HTV) silicone rubbers containing filler silica and alumina into cyclosiloxane monomers and spontaneous recovery of fillers were studied. First, HTV silicone rubber was treated with different types of solvents in the presence of KOH to find that a triad mixture of diethylamine, methanol and hexane was appropriate not only to dissolve the silicone rubber to a suspension but also to separate fillers completely by filtration. The filtrate was distilled to remove solvent first and then give pure cyclosiloxane monomers in 76–84% yields. Second, the rubbers were treated with other types of triad mixture of solvents and bases, e.g. tetramethylammonium hydroxide, hexane and diethylamine. After filtration, residue was again treated with the amine and hexane to recover clean fillers in 83–93% yields. Cyclosiloxane monomers were also obtained from the combined filtrates in 67–78% yields.     

Performance analysis of linear multiuser detectors for randomlyspread CDMA using Gaussian approximation

The performance of a linear decorrelating detector (LDD) and a minimum mean square error (MMSE) detector is analyzed for random spreading waveforms. The performance of the LDD and MMSE detectors is expressed in terms of the so-called near-far resistance, defined by a reciprocal of a diagonal component of inverse matrix. For random code division multiple access, which employs random spreading waveforms, the near-far resistance can be regarded as a random variable. Many papers have dealt with the analysis of multiuser detectors for random spreading sequences. In most cases, however, these analyses derived only the expectations or bounds for the near-far resistance. In this paper, we directly derive the approximate probability density function (PDF) of the near-far resistance and corresponding bit error rate expression for random spreading sequences. It is based on Gaussian approximation of the cross correlation between any two randomly generated spreading codes. The resulting PDF turned out to be a reversed-and-scaled version of chi-square distribution. The approximate expressions, both the PDF and the corresponding bit error rate expression, were verified via Monte Carlo simulations. The results showed that the approximation is quite close to the simulation results when the number of users is less than half the processing gain     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Antibacterial actin of vinegar against food-borne pathogenic bacteria including Escherichia coli O157:H7 (Part 2). Effect of sodium chloride and temperature on bactericidal activity

Bactericidal effects of various kinds of AWASEZU (processed vinegar, 2.5% acidity) on food-borne pathogenic bacteria including Escherichia coli O157:H7 and other bacteria were examined. the order of bactericidal activities was NIHAIZU (3.5% NaCl was added) > SANBA-IZU (3.5% NaCl and 10% sucrose were added) > plain vinegar (spirit vinegar) > AMAZU (10% sucrose was added). This indicates that their activities were enhanced by the addition of sodium chloride and suppressed by the addition of sugar. On the other hand, when soy sauce was used instead of sodium chloride, the order of bactericidal activities was plain vinegar > AMAZU > NIHAIZU > SANBAIZU. This is mainly because their activities were suppressed by the increase in the pH value. The effect of sodium chloride (0.01-15%) and temperature (10-50 degrees C) on bactericidal activities against E. coli O157:H7 in spirit vinegar (0.5-2.5% acidity) was further examined. When vinegar was used in combination with sodium chloride, predominant synergism on the bactericidal activity was observed. Their activities were markedly enhanced by the addition of sodium chloride in proportion to the concentration. In addition to this, at higher temperatures spirit vinegar killed bacteria much more rapidly. It should be noted that the bactericidal activity of spirit vinegar was extremely enhanced by the combined use of the addition of sodium chloride and the rise of temperature. For example, in 2.5% acidity vinegar, the time required for 3 log decrease in viable cell numbers at 20 degrees C was shortened to 1/140-fold by the addition of 5% sodium chloride, shortened to 1/51-fold by the rise of the reaction temperature at 40 degrees C, and shortened to 1/830-fold; 0.89 minutes by both the addition of 5% sodium chloride and the rise of temperature at 40 degrees C. In order to propose the methods to prevent food poisoning by bacterial infection, bactericidal activities of vinegar solution containing sodium chloride on cooking tools and raw vegetables were examined. Vinegar solution (1-2% acidity, 3-7% NaCl) produced more than 3 log decrease in viable cell numbers of E. coli O157:H7 on the surface of cutting board, and cabbage and cucumber at 20-50 degrees C. These results suggested that the treatment with vinegar solution containing sodium chloride may be one of the useful methods to prevent food poisoning.     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress     

High frequency capacitance measurements on metal–insulator–semiconductor structures in thermal non-equilibrium condition

We simulate the charge carrier traffic between the energy bands and the interface states in structures like Al/SiO₂/6H–SiC, Al/diamond/Si and Al/SIPOS/Si to explain their high frequency capacitance–voltage behavior. The structures have in common that traditional electrical measurement techniques performed at room temperature are prone to thermal non-equilibrium effects. This can result in large errors in the interface data extracted from such studies when thermal equilibrium conditions are assumed. In this work, high frequency capacitance–voltage data are compared to numerical simulations which include such thermal non-equilibrium conditions to enable more accurate estimates of interface state parameters in above-mentioned structures.     

A novel therapeutic approach for rectal varices: a case report of rectal varices treated with double balloon-occluded embolotherapy

We present a patient with continuous melena, diagnosed as rectal varices bleeding. She had a history of esophageal varices, which was treated by endoscopic ligation therapy. Eight years after the treatment of esophageal varices, the continuous melena began. Colonoscopic examination showed that the melena was caused by rectal varices, which were so severe that they could not be treated by either endoscopic sclerotherapy or surgical devascularization. Taking into considering the overall risk of treating rectal varices, we chose the approach of double balloon-occluded embolotherapy (DBOE) with 5% ethanolamine oleate with iopamodol as a liquid embolic material. DBOE is one of the interventional radiology techniques (Morita et al., Acta Hepatol Jpn 1994;35:109-120), but in this case was a completely new and novel clinical procedure for rectal varices. After the DBOE therapy, the condition of rectal varices was markedly improved. Thus, DBOE might be a new tool for treating inoperable rectal varices.     

Rethinking infant knowledge: toward an adaptive process account of successes and failures in object permanence tasks

Infants seem sensitive to hidden objects in habituation tasks at 3.5 months but fail to retrieve hidden objects until 8 months. The authors first consider principle-based accounts of these successes and failures, in which early successes imply knowledge of principles and failures are attributed to ancillary deficits. One account is that infants younger than 8 months have the object permanence principle but lack means-ends abilities. To test this, 7-month-olds were trained on means-ends behaviors and were tested on retrieval of visible and occluded toys. Means-ends demands were the same, yet infants made more toy-guided retrievals in the visible case. The authors offer an adaptive process account in which knowledge is graded and embedded in specific behavioral processes. Simulation models that learn gradually to represent occluded objects show how this approach can account for success and failure in object permanence tasks without assuming principles and ancillary deficits.